|
|
2.9.3[Line Move[Ctl-P]] command
|
|
It moves/deletes a Control point line with chosen object(curved surface).
| TOOL |
 |
Function Key
|
| no-function Key |
Usually,Point Move |
| F5 key is pushed and it is command starting. |
Shape |
| F6 key is pushed and it is command starting. |
Shading |
| F7 key is pushed and it is command starting. |
1 axis symmetry |
| F8 key is pushed and it is command starting. |
2 axis symmetry |
| F9 key is pushed and it is command starting. |
Passage Point |
| F12 |
LIMIT |
When starting this command, the command which was starting before it is automatically ended.
A procedure is shown below.
1. It chooses the object (curved surface). (For the details, refer to The
way of choosing object.)
2. When the numerical input of the amount of variation with The specified Control point position is carried out
It starts [Numeric Mode] command and it makes a numerical value input
state.
The starting of [Numeric Mode] command can be omitted when starting a menu while pushing Numeric Mode Shortcut
Key(Generally : Shift ), too.
3. When displaying movement distance with the Control point position in the numerical value before movement
It starts [Show The Number] command and it makes a numerical value display
condition.
4. When Shape is reversed from the present setup.
F5 key is pushed, and the [Shape] mode is taken. When effective, it can edit in the form at the time of generation.
5. When Shading is reversed from the present setup.
F6 key is pushed, and the [Shading] mode is taken. Shading will be carried out by the solid of a perspective when
effective.
6. When [Line Move]command is done with [1 axis Symmetry].
F7 key is pushed, and the [1 axis Symmetry] mode is taken.
7. When [Line Move]command is done with [2 axis Symmetry].
F8 is pushed, and the [2 axis Symmetry] mode is taken.
8. When [Line Move]command is done with [Passage Point].
F9 key is pushed, and the [Passage Point] mode is taken.
9. It starts [Line Move[Ctl-P]] command.
10. In case of [1 axis Symmetry] mode
Arbitrary one plane of three planes is chosen. An axis (green) is displayed on the selected plane.
11. In case of [2 axis Symmetry] mode
Arbitrary one plane of three planes is chosen. An axis (green) is displayed on the selected plane.
12. In case of the numerical value input state
(a) The TRACKER is displayed in the Control point position.
TRACKER color
Blue : The sweep and revolve directional Control point line.
Dark Green : The section directional Control point line.
(b) It clicks the left button according to TRACKER in the mouse cursor.
Left button click - The choice of the Control point line.
Left button drag - The choice of the Control point line.
Line Mode Change Key (Generally : Shift) + Left button click - The reverse of the curve point/broken line point
and the choice of the Control point line
With the above key + Ctrl Point Add Key (Generally : Ctrl), it is chosen in the addition by the selection control
point line before it.
TRACKER color : Yellow : The choice Control point line (The movement point).
(c) It drags chosen TRACKER (Yellow).
(d) The [Line Move[Ctl-P]] Dialog Box is displayed. It specifies movement distance.
[Line Move[Ctl-P]]Dialog Box
At this time, in the case of each symmetrical mode, movement is interlocked with by two or more point selection,
and it carries out symmetrical movement.
13. In case of the mouse input state (except the numerical value input state)
(a) The TRACKER is displayed in the Control point position.
TRACKER color
Blue : The sweep and revolve directional Control point line.
Dark Green : The section directional Control point line.
(b) It clicks the left button according to TRACKER in the mouse cursor.
Left button click - The choice of the Control point line.
Left button drag - The choice of the Control point line.
Line Mode Change Key (Generally : Shift ) + Left button click - The reverse
of the curve point/broken line point
and the choice of the Control point line
With the above key + Ctrl Point Add Key (Generally : Ctrl ), it is chosen
in the addition by the selection control
point line before it.
TRACKER color : Yellow : The choice Control point line (The movement point).
(c) It drags chosen TRACKER (Yellow).
At this time, in the case of each symmetrical mode, movement is interlocked with by two or more point selection,
and it carries out symmetrical movement.
Drag - It is not in the movement limitation.
Mouse Limit Key (Generally :Ctrl ) + Drag - It limits a movement to the
vertical/horizontal/slant (45 degrees) direction.
When limiting a movement, continue to push Mouse Limit Key until it specifies a Control point. In case of the
numerical value display condition, it displays the displacement quantity of the movement origin Control point
position and the mouse cursor location.
This command doesn’t end automatically. As for the way of ending, refer
to P3 The way of command’s ending. As for the TRACKER, refer to P8 The
way of the TRACKER operation. In P91 [Environment] command, Line Mode Broken Line/Change
Key, Mouse Limit Key can be changed, too. When a thing except 0 is set
to the Tension Coefficient, it has an
influence on the thing except the moving Control point, too. For the details, refer to P81 [Tension Coefficient] command.
Refer to [Control Point and Passage Point] about Passage Point.
The Control point which was automatically added to the section in the edge
becomes the processing object outside. The automatically added Control
point is together moves/deletes when it moves/deletes a Control point line
in the edge.
Since Ver1.1
The range limitation function was made.
The control point is made non-display by acquiring the center of the object
automatically now and specifying the direction of side in the front side
back of the direction seen from each axis.
This item of effective comes to display it by putting the check.
Moreover, the back and Front
Front : small direction
Back: Maximum direction
When setting it as follows. The control point on X preaxial side (Because
it is the maximum value) becomes non-display.
In the control point movement, when the range is exceeded, it becomes non-display.
(necesary more development. )
|
| |
| Copyright 2009 GLB Co., Ltd All Right Reserved |
|
