2.9.2[Point Move[Ctl-P]] command

TOOL

When starting this command, the command which was starting before it is automatically ended.
A procedure is shown below.
1. It chooses the object (curved surface). (For the details, refer to The way of choosing object.)
2. When the numerical input of the amount of variation with The specified Control point position is carried out
It starts P20 [Numeric Mode] command and it makes a numerical value input state.
The starting of [Numeric Mode] command can be omitted when starting a menu while pushing Numeric Mode Shortcut
Key(Generally :Shift ), too.
3. When displaying movement distance with the Control point position in the numerical value before movement
It starts P23 [Show The Number] command and it makes a numerical value display condition.
4. When Shape is reversed from the present setup.
F5 key is pushed, and the [Shape] mode is taken. When effective, it can edit in the form at the time of generation.
5. When Shading is reversed from the present setup.
F6 key is pushed, and the [Shading] mode is taken. Shading will be carried out by the solid of a perspective when　effective.
6. When [Point Move]command is done with [1 axis Symmetry].
F7 key is pushed, and the [1 axis Symmetry] mode is taken.
7. When [Point Move]command is done with [2 axis Symmetry].
F8 key is pushed, and the [2 axis Symmetry] mode is taken.
8. When [Point Move]command is done with [Passage Point]
F9 key is pushed, and the [Passage Point] mode is taken.
9. It starts [Point Move[Ctl-P]] command.
10. In case of [1 axis Symmetry] mode
Arbitrary one plane of three planes is chosen. An axis (green) is displayed on the selected plane.
11. In case of [2 axis Symmetry] mode
3Arbitrary one plane of three planes is chosen. An axis (green) is displayed on the selected plane.
12. In case of the numerical value input state
(a) The TRACKER is displayed in the Control point position.
TRACKER color
Blue : The Control point of the curve point(Section) and curve point(Sweep/Revolve).
Light Blue : The Control point of the curve point(Section) and broken line point(Sweep/Revolve).
Dark Green : The Control point of the broken line(Section) and curve point(Sweep/Revolve).
Green : The Control point of the broken line point(Section) and broken line point(Sweep/Revolve).
(b) It clicks the left button according to TRACKER in the mouse cursor.
Left button click - The choice of the Control point.
Left button drag - The choice of the Control point.
Line Mode Change Key (Generally : Shift ) + Left button click - The reverse of the curve　point/broken line point　and the choice of the Control point　With the above key + Ctrl Point Add Key (Generally : Ctrl ), it is chosen in the addition by the selection control　point before it.
TRACKER color : Yellow : The choice Control point (The movement point).
(c) It drags chosen TRACKER (Yellow).
(d) The [Point Move[Ctl-P]] Dialog Box is displayed. It specifies movement distance.


[Point Move[Ctl-P]]Dialog Box
At this time, in the case of each symmetrical mode, movement is interlocked with by two or more point selection,
and it carries out symmetrical movement.
13. In case of the mouse input state (except the numerical value input state)
(a) The TRACKER is displayed in the Control point position.
TRACKER color
Blue : The Control point of the curve point(Section) and curve point(Sweep/Revolve).
Light Blue : The Control point of the curve point(Section) and broken line point(Sweep/Revolve).
Dark Green : The Control point of the broken line(Section) and curve point(Sweep/Revolve).
Green : The Control point of the broken line point(Section) and broken line point(Sweep/Revolve).
(b) It clicks the left button according to TRACKER in the mouse cursor.
Left button click - The choice of the Control point.
Left button drag - The choice of the Control point.
Line Mode Change Key (Generally : Shift ) + Left button click - The reverse of the curve point/broken line point
and the choice of the Control point
With the above key + Ctrl Point Add Key (Generally : Ctrl ), it is chosen in the addition by the selection control
point before it.
TRACKER color : Yellow : The choice Control point (The movement point).
(c) It drags chosen TRACKER (Yellow).
At this time, in the case of each symmetrical mode, movement is interlocked with by two or more point selection,
and it carries out symmetrical movement.
Drag - It is not in the movement limitation.
Mouse Limit Key (Generally : Ctrl ) + Drag - It limits a movement to the vertical/horizontal/slant (45 degrees)
direction.
When limiting a movement, continue to push Mouse Limit Key until it specifies a Control point. In case of the
numerical value display condition, it displays the displacement quantity of the movement origin Control point
position and the mouse cursor location.
This command doesn’t end automatically. As for the way of ending, refer to P3 The way of command’s ending. As for　the TRACKER, refer to The way of the TRACKER operation. In P91 [Environment] command, Line Mode Broken
Line/Change Key, Mouse Limit Key, Shape, Shading can be changed, too. When a thing except 0 is set to the Tension　Coefficient, it has an influence on the thing except the moving Control point, too.
For the details, refer to [Tension Coefficient] command. Refer to [Control Point and Passage Point] about Passage　Point.

Since Ver1.1
　　The range limitation function was made.
　The control point is made non-display by acquiring the center of the object automatically now and specifying the direction of side in the front side back of the direction seen from each axis.
This item of effective comes to display it by putting the check.
Moreover, the back and Front
Front : small direction
Back: Maximum direction
　　When setting it as follows. The control point on X preaxial side (Because it is the maximum value) becomes non-display.
　


In the control point movement, when the range is exceeded, it becomes non-display. (necesary more development. )