|
|
2.10.15 [Rendering Environment] command
|
|
It sets the display condition of the color to use at the time of the shading/Rendering.and
It sets the condition of the light source and the environment mapping to
use at the time of the rendering.
When starting this command, the command which was starting before it is automatically ended.
A procedure is shown below.
1. It starts [Rendering Environment] command.
2. The [Rendering Environment] Dialog Box is displayed.
Color Material Tab
1. It chooses a color (material).
2. It chooses a color type.
3. It specifies RGB of the specification color (material) and color type.
At this time, the color of specification RGB is displayed by the rendering on the perspective drawing.
The color (material) has three kinds (Ambient and Diffuse, Specular, Emission) of RGB.
Rendering Environment] command.
light color type Tab
1. It chooses a light color type.
2. It specifies RGB of the specification light color type.
At this time, the color of specification RGB is displayed by the rendering
on the perspective drawing. The light source has three kinds (Ambient,
Diffuse, Specular) of RGB.
Environment Mapping
chose Mapping File
|
